Advertisement
IMPORTANT SAFETY INSTRUCTIONS
13.Do not use this product for functions other than those described in this instruction
manual.14.Before cleaning, turn off the power and unplug the appliance.
15.Disconnect the power if strange sounds, smell, or smoke comes from it.
16.Do not press the buttons on the control panel with anything other than your fingers.
17.Do not operate or stop the appliance by inserting or pulling out the power cord plug.
18.Do not use hazardous chemicals to clean or come into contact with the appliance.
Do not use the appliance in the presence of inflammable substances or vapour such as
alcohol, insecticides, petrol,etc.
19.Always contact a qualified person to carry out repairs. If the damaged power supply cord
must be replaced with a new power supply cord obtained from the product manufacturer
and not repaired.
20.Hold the plug by the head of the power plug when taking it out.
21.Turn off the product when not in use.
Operation of Current Device
The power supply cord contains a current measuring device that detects damage to the
power cord. Test your power supply cord as follows:
1. Plug in the air conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button.
You will notice a click as the RESET button pops out.
3. Press the RESET Button. You will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit.
(On some products this is also indicated by a light on the plug head.)
NOTE:
1. The power supply cord with this air conditioner contains a current detection device
designed to reduce the risk of fire.
2. In the event that the power supply cord is damaged, it can not be repaired. It must be
replaced with a cord from the manufacturer.
3. Do not use this device to turn the unit on or off.
4. Always make sure the RESET button is pushed in for correct operation.
5. The power supply cord must be replaced if it fails to reset when either the TEST button is
pushed, or it can not be reset.Please contact Customer Service.
Plug in & press RESET
Grounding type wall receptacle
Do not, under any
circumstances, cut,
remove or bypass
the grounding prong.
Power supply cord with 3-prong grounding
plug and current detection device.
3
Advertisement
