Advertisement
USING YOUR AIR CONDITIONER
Mode
Button
Timer
Button (On
Remote
Control)
Eco Mode
Button (On
Remote
Control)
Press repeatedly to cycle through Cool, Dry, Fan and Auto modes.
Cool Mode
- In Cool mode, the air conditioner cools the room to the desired
temperature.
- Temperature and fan speed are adjustable.
Dry Mode
- In Dry mode, the air conditioner works as a dehumidifier to remove
humidity in the room. The fan is constantly running at a low speed.
- Temperature and fan speed cannot be adjusted.
Fan Mode
- In Fan mode, the air conditioner circulates air like a normal fan.
Remember to open the vent during this function, but keep it closed
during cooling for maximum cooling efficiency.
- Fan speed can be set to Low, Med, or High.
- Temperature cannot be adjusted.
Auto Mode
- In Auto mode, the air conditioner adjusts its working mode
(Cool or Fan) automatically based on the room temperature.
- Temperature and fan speed cannot be adjusted.
- When the air conditioner is on standby/running, press the Timer
button and its icon will flash on the remote display. During the
flashing process, press + or - to select a timer from 0.5 to 24 hours,
then press the Timer button again to confirm the setting. After the
timer ends, the air conditioner will start/stop running
automatically.
- Turning the air conditioner ON or OFF at any time or adjusting the
timer setting to 0.0 hour will cancel the timer program.
In Eco mode, when the desired temperature is reached, the
compressor will turn off and the fan will continue to run for
3 minutes. Then the fan cycles on for 1 minutes at 5 minute intervals
until the room temperature is above the set temperature, at which
time the compressor turns back on and cooling restarts.
20
Advertisement
