Table of Contents
Advertisement
Figure 16
1. Support (front fin—mower
deck)
2. Front fins
2.
Assemble the front fins to the mower deck
(Figure
16) with the 7 self-tapping, flange-head
screws (6 x 20 mm) that you removed in
Removing the Front Fins (page
3.
Tighten the self-tapping, flange-head screws.
Assembling the Wheels to the
Machine
1.
Assemble a wheel onto the axle with the flange
locknut (3/8) that you removed in
Wheels (page
5).
Figure 17
1. Axle
2. Wheel
2.
Tighten the locknut.
3.
Repeat steps
1
and
side of the machine.
3. Self-tapping, flange-head
screw (6 x 20 mm)
5).
Removing the
3. Flange locknut (3/8 inch)
2
for the wheel at the other
6
Finishing the Kit
Installation.
No Parts Required
Procedure
g285247
Add fuel to the fuel tank; refer to the Operator's
Manual for your machine.
g284727
9
Advertisement
Table of Contents
