Maintenance And Care; 10 Scrapping And Disposal - Sitec TX MATIC Operating Manual

9

Maintenance and Care

Switch off the machine during maintenance and repair work and secure the main switch
against unauthorised restarting (e.g. with a padlock)!
• Always make sure that the bridge guard is fully functional.
• Always keep the moving parts running smoothly.
• Clean the bridge guard regularly.
• Replace any damaged parts immediately.
• Regularly check the tightness of the fastening screws to the guard.
• Always completely cover the cutter block with the bridge guard after work.
10 Scrapping and Disposal
When scrapping the bridge guard, the current EU regulations or the respective regulations and laws of the coun-
try of operation, which are prescribed for proper dismantling and disposal, must be complied with. The aim is to
dismantle all materials and components properly, to recycle recyclable parts and to dispose of non-recyclable
components in the most environmentally friendly way possible.
• Plastic parts and other non-metal components must be dismantled and recycled or dis-
posed of separately.
• Dismantle all metal parts of the guard and sort them according to material type (steel,
aluminium). Metals can be melted down and recycled.
BA_ST_TX-MATIC_EN_08-22.docx
9