Table of Contents
Advertisement
Available languages
Available languages
EN
Technical data
Model:
NS5010
Nominal Volume:
5Lt
Operating Pressure:
1-3Bar
Operating Stroke:
190mm
Overall Size:
Ø180x470mm
Relief Pressure:
3-3.6Bar
Net Weight:
1.32Kg
Description of main parts
Pump handle
Funnel
Safety valve
Tank
Strap
Pump
Tank base
Operating instructions
How to Operate the Sprayer
Check to ensure all the parts are available upon unpacking, before assembling in line with the diagram.
1. Assembly of spray head
3. Spraying
3
NS8010
8Lt
1-3Bar
225mm
Ø180x655mm
3-3.6Bar
1.71Kg
Cone nozzle
Pressure regulation valve
Spray boom
Hose
Shut-off valve
2. Assembly of spray lance
Before spraying, you shall hold the pumping handle to force its lower end into the groove
of the guide base and turn the handle to remove the pump unit so as to fill the tank with
prepared spray chemical to rated volume, followed by replacing the pump and pumping
to inflate the tank(Make sure the shut-off valve on Shut position) . When the pressure
inside the tank increases, you may hold-down the shut-off valve to start spot or continual
spraying. The nozzle cap may be varied to select proper spraying type to meet the de-
mands of crops.
WWW.NAKAYAMATOOLS.COM
* The manufacturer reserves the right to make minor changes to product
design and technical specifications without prior notice unless these changes
significantly affect the performance and safety of the products. The parts
described / illustrated in the pages of the manual that you hold in your hands
may also concern other models of the manufacturer's product line with similar
features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in com-
mercial, trade or industrial applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial businesses or for equivalent
purposes.
* To ensure the safety and reliability of the product and the warranty validity,
all repair, inspection, repair or replacement work, including maintenance and
special adjustments, must only be carried out by technicians of the authorized
service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the
product with non-provided equipment may cause malfunctions or even seri-
ous injury or death. The manufacturer and the importer shall not be liable for
injuries and damages resulting from the use of non-conforming equipment.
Advertisement
Table of Contents
