Tesla MODEL 3 2012 Owner's Manual page 41

Before seating a child, ensure that the child restraint
system is securely installed. Grasp the front of the child
restraint system with one hand on each side, and
attempt to:
• Twist the child restraint system from side to side.
• Pull the child restraint system away from the seat.
If the child restraint system rotates or moves away from
the seat, both latches are not fully engaged onto the
seat's anchor bars. You must reinstall it and try again. It
is critical that both latches on the child restraint system
are fully engaged.
WARNING: Do not use ISOFIX/i-Size anchors with
child restraint system or booster seats that have an
integral safety belt where the combined weight of
the child plus the child restraint system exceeds 33
kg.
Safety Leg
All passenger seats Model 3 support the use of a child
restraint system with a safety leg. If the child restraint
system is equipped with a leg, extend the leg as
described in the instructions provided by the
manufacturer of the child restraint system.
Seating and Safety Restraints
Child Safety Seats
Attaching Upper Tether Straps
Model 3's rear seats support the use of upper tether
straps. When the instructions provided by the
manufacturer of the child restraint system include
attaching an upper tether strap, attach its hook to the
anchor point located behind the associated seat.
NOTE: Tighten upper tether straps according to the
instructions provided by the manufacturer of the child
restraint system.
The anchor points for tether straps are located on the
shelf behind the rear seats.
To access an anchor point, press down on the back of its
cover.
39