Advertisement
9.
Calibrate the smart camera by holding your smartphone 15-20cm away from the
camera lens until it successfully scans the QR code shown on the following screen
of the setup. The device will make a Prompt sound to confirm, click "I heard a
prompt" to proceed to the next screen.
10. The device will commence the pairing process and connect to the app. Ensure your
Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until
connection is complete.
11.
After successfully being added, you will have the option to rename the device and
assign it to a location. It will now be listed on the app's home page. Tap the device
listing to enter its control page.
Notes:
The device and the app have to use the same Wi-Fi network.
•
•
The device is only compatible with 2.4Ghz networks.
•
Ensure the number bits in the SSID and password of the router do
not exceed 24 digits.
Advertisement
