Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the red light will
be blinking).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by resetting the device. Using the supplied Reset Pin, press and hold the
'RESET' button for 5 seconds to reset the device. Once reset, the red light will begin to flash.
Add device through network
5.
Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6.
Select the product type from the list of options in the app (Home Security >
Cameras).
7.
Ensure that the device is in pairing mode, with the red light flashing, and tap
"Confirm light is rapidly flashing".
8.
Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important
that your SmarterHome™ device and the app are connected to the same Wi-Fi
network during setup.
Advertisement
