Safety Information - Silvercrest SSW 400 A1 Operating Instructions Manual

Safety information

RISK OF ELECTRIC SHOCK
Connect the appliance only to correctly installed mains
►
power sockets that supply a current rating of 220–240 V ~ /
50/60 Hz.
In event of operating malfunctions and before cleaning the
►
appliance, remove the power plug from the mains power
socket.
Do not expose the appliance to moisture and do not use it
►
outdoors.
If any liquid gets into the housing, disconnect the appliance
►
from the mains power socket immediately and have it re-
paired by a qualified technician.
Always pull on the plug to disconnect the appliance from the
►
mains; never pull on the power cable itself.
Do not kink or crush the power cable, and route the cable so
►
that it cannot be stepped on or tripped over.
Arrange for defective power plugs and/or cables to be
►
replaced as soon as possible by a qualified technician or by
our Customer Service Department to avoid the risk of injury.
This appliance may be used by persons with limited physi-
►
cal, sensory or mental capabilities or lack of experience
and knowledge, provided that they are under supervision
or have been told how to use the appliance safely and are
aware of the potential risks.
The appliance and its connecting cable must be kept away
►
from children.
Do not attempt to open the hand blender's motor casing.
►
This can lead to risks and also invalidates the warranty.
Never immerse the motor unit of the blender in liquids, or
allow liquids to get into the motor unit housing.
SSW 400 A1
GB │ MT 65 ■
│