External Monitor - Toshiba M750 User Manual

PORTÉGÉ M750
3. Close the lid and slide the lock to the lock position.
For details on inserting the Ultra Slim Bay HDD Adaptor II in the computer's
Ultra Slim Bay slot, refer to Chapter 4,

External monitor

An external analog monitor can be connected to the external monitor port
on the computer.
Connecting the monitor cable
To connect a monitor, follow the steps as detailed below:
1. Turn the computer's power off.
2. Connect the monitor cable to the external monitor port and tighten the
screws on the left and right hand side of the connector as required.
3. Turn the external monitor's power on.
4. Turn the computer's power on.
3-40
External monitor port
Figure 3-25 Connecting the monitor cable to the external monitor port
Figure 3-24 Closing the lid
Operating
Lid
Basics.
Monitor cable
User's Manual