Optional Devices - Toshiba M750 User Manual

PORTÉGÉ M750
To enable TPM through the BIOS setup:
1. Turn on the computer while pressing the ESC key.
2. Press the F1 key when directed.
3. Press the PGDN key.
4. Press the down arrow key until TPM is highlighted, then press the
5. Press the Y key to save the changes.
6. Press END and then press the Y key to accept the changes.
In order to change the TPM setting when the Hide TPM setting is currently
set to Yes, switch the Hide TPM setting from Yes to No.

Optional devices

Optional devices can expand the computer's capabilities and its versatility.
This section describes the connection or installation of the following
devices:
To connect optional devices (such as USB device or External monitor) to
the computer, be sure to check the shape and orientation of the connector
before connecting.
Cards/memory
PC Card
Smart Card
Bridge media slot
Additional memory module
Peripheral devices
HDD Kit (Serial-ATA)
Ultra Slim Bay HDD Adaptor II
External monitor
USB FDD Kit
eSATA
i.LINK (IEEE1394)
TOSHIBA Express Port Replicator
Other
Security lock
3-16
space bar to change the TPM status to Enabled.
The computer will restart.
Secure Digital (SD) Card (SD memory card, SDHC memory card,
miniSD Card, microSD Card)
Memory Stick (Memory Stick, Memory Stick PRO, Memory Stick
PRO Duo)
xD picture card
MultiMediaCard
User's Manual