Table of Contents
Advertisement
Presetting of Camera Position by Administrator (Cont.)
Selecting a Preset
Selecting a preset from the list moves the camera to the preset position.
1
In the list, click
of the preset you want to select.
･ The camera will only move to a preset that has been set. Selecting
a blank preset will not move the camera. See "Configuring a
Preset" on the next page.
42
(go to Preset) button on the left
Configuring a Preset
Assign the camera position in the Preset list.
1
Click the
button to move the camera to the
position you want to set.
2
In the list, click
(set Preset) button on the right
of the preset you want to configure.
3
Click the OK button to assign a preset position.
・ Assign the current camera position in the selected preset.
NOTE
Any existing settings of a preset will be overwritten when you assign new
●
settings to the preset.
The brightness adjustment value, rear light correction setting and manual/
●
auto focus setting are stored for each preset number.
43
Hide quick links:
Advertisement
Table of Contents
