Extel WAVE Installation And User Manual page 18

E - INST ALLATION
3. Click on "appareil connecté au réseau" (device
connected to the network), then "appareil connecté"
(device connected).
Make sure that the smartphone is connected to the
same WiFi network as the monitor.
4. Enter the name you want to give your device.
Scan the monitor's QR code or enter the monitor ID
(information available in the WiFi settings and
password).
Important: When you click on the QR Code to the right
of the UID line, you will be able to scan the videophone
en - 10 EXTEL - WAVE - 720313
monitor's QR Code and get its UID faster.
Click on Save.
If the videophone is not nearby, you can scan the
barcode in the Extel Connect owner's application.
The barcode is available under the "Inviter un ami" (Invite
a friend) menu in the already connected application.
5. Y our smartphone can now receive calls from your
videophone.
Interface function
Contains the different devices and enables
switching to monitoring mode.
Enables you to add a device.
Click the image to enter monitoring mode. The
monitoring option is only available when the PowerBox
is mains-powered (via the power supply unit provided)
Activate/Deactivate the sound
Take a video
Take a photo