Clearances; Assembly - Buffalo DC319-P Assembly, Installation And Operation Instructions

Installation

Clearances

NOTE:
THESE UNITS ARE SUITABLE FOR INSTALLATION ON NON-COMBUSTIBLE SURFACES
ONLY.
For use in non-combustible locations only
For use only on non-combustible ground
Noncombustible and unit clearances: sides and rear – 14

Assembly

NOTE:
• This appliance is assembled before delivery except castors.
• This appliance is fitted with castors to enable the appliance to be positioned securely and level.
This should be carried out on completion of the gas connection. Refer to the 'Gas
Connection' section.
• IM states that the appliance shall be installed in such a way that side body surfaces are not ac-
cessible in the installed position.
•
"
(355mm) floor
7
When a fryer is
installed on cas-
tors, the fryer
restraint chain
must be at-
tached to the
back of the unit
and adjacent
wall.