Commissioning
Before leaving the converted installation;
1.
Check all gas connections for leakages.
2.
Check the following functions in accordance with the operating instructions
•
Light the Pilot Burner.
•
Light the Main Burner..
•
Ensure that all the controls operate correctly.
•
Ensure that the operating pressure remains correc
3.
Ensure any adjustments done to components that have the adjustments / settings sealed
(e.g. paint sealed) are re-sealed.
DO NOT USE A NAKED FLAME TO CHECK FOR GAS LEAKAGES.
NOTE: If for some reason it is not possible to get the appliance to operate correctly, shut off the
gas supply and contact the supplier of this appliance.
WARING:
22
t.