Table of Contents
Advertisement
Quick Links
Set-up Your Skye
Lay Skye down on its side
(avoid laying on its face).
Unscrew the base cover
(turn counterclockwise).
Remove the UVC lamp
from the box.
Plug power cord into Skye
and wrap any excess cord
around the base.
Download the "air health IAQ"
app to complete set-up and
enable controls from your phone.
Remove the PRO-Cell filter
from Skye.
Hold the base of the lamp
and plug into Skye until you
hear a click.
Lift Skye back up and place it
an open space to aid airflow.
Remove outer plastic bag
from PRO-Cell filter.
Place the "PRO-Cell" filter back into
Skye. Close the base cover by aligning
the arrows and then turning clockwise
into the locked position. If the black
arow and the white dash are not
precisely aligned, the unit will not
turn on.
Plug the power cord into a power
outlet and tap the power button
(on back).
FLIP OVER FOR
How To Use SKYE
Advertisement
Table of Contents
Related Manuals for Air+Health Skye
Summary of Contents for Air+Health Skye
- Page 1 (turn counterclockwise). Place the "PRO-Cell" filter back into Hold the base of the lamp Remove the UVC lamp Skye. Close the base cover by aligning and plug into Skye until you from the box. the arrows and then turning clockwise hear a click.
- Page 2 Smart Mode Manual Mode On this setting, you set the minimum fan On this setting, you set the fan speed and Skye speed and Skye will automatically increase fan will not change speed. speed if it measures poor air quality. The fan will never decrease below this speed.
Need help?
Do you have a question about the Skye and is the answer not in the manual?
Questions and answers