Advertisement
Quick Links
Quick Start
Lay Skye down on its side (avoid
laying on its face). Unscrew the
base cover (turn left).
Remove the UVC lamp from
the box.
Plug power cord into Skye and
wrap any excess cord around
the base.
Download the "air health IAQ"
app to complete set-up and
enable controls from your phone.
Remove the PRO-Cell
filter from Skye.
Hold the base of the lamp
and plug into Skye until you
hear a click.
Lift Skye back up and place it
an open space to aid airflow.
Remove outer plastic bag from
PRO-Cell filter.
Place the PRO-Cell filter back into
Skye and screw the cover back on
(turn right) until you hear a click.
Plug the power cord into a
power outlet and press the
power button (on back).
FLIP OVER
Advertisement
Related Manuals for Air+Health Skye
Summary of Contents for Air+Health Skye
- Page 1 Quick Start Lay Skye down on its side (avoid Remove the PRO-Cell Remove outer plastic bag from laying on its face). Unscrew the filter from Skye. PRO-Cell filter. base cover (turn left). Hold the base of the lamp Place the PRO-Cell filter back into...
- Page 2 Smart Mode Manual Mode On this setting, you set the minimum fan On this setting, you set the fan speed and Skye speed and Skye will automatically increase fan will not change speed. speed if it measures poor air quality. The fan will never decrease below this speed.
Need help?
Do you have a question about the Skye and is the answer not in the manual?
Questions and answers