Page 1
USER MANUAL English Please Read and Keep for Future Reference...
Page 2
Thank you for choosing to buy an Air+Health air purifier. We BELIEVE in safe spaces. We are DEDICATED to making the best air purifiers on earth to enable you to live your healthiest life. We STRIVE to apply the best technology and research into delivering you safe and clean air.
For the highest effectiveness, Skye should run all the time. Quick Start Give Skye Space Controls & Interface Skye will work in any room, but for it to purify the most air, Settings it needs space around it, away from walls and furniture to Air Quality Indicator help maximize its airflow.
Meet Your New Skye Unit: Control Dial User Interface Screen Clean Air Exit Power Button VOC & Particle Sensor Power Connection Port UVC Lamp PRO-Cell Filter • Pre-filter • Carbon • HEPA • PCO...
ALWAYS DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE SUCH AS REPLACING THE FILTER AND/OR LAMP. Quick Start Remove Packaging Install Lamp and Filter Lay Skye down on its Remove the PRO-Cell Remove outer Remove the UVC Hold the base of Place the PRO-Cell filter side (avoid laying on filter from Skye.
Color will change to alert when the filter needs to be replaced. Manual Mode Fan Level On this setting, you set the fan speed and Skye will On the home page, turning not change speed. the dial changes the fan level.
Clicking on the cog icon will take you to screen to activate the Settings, scroll between pages and click to child lock; click and hold control Skye’s WiFi, lamp, and filter status. again to deactivate. 1. Return Home 2. WiFi Status & Control 3.
Note: Connecting Skye to WiFi will enable filter and lamp status E2: Error Code Lamp Malfunction indicators on the device and in the app. This will help you Please reset the device by This means the lamp track when your Skye needs a new filter or lamp.
Replacing the Filter Unplug Skye and lay Remove the old Remove any Re-insert the new Plug Skye back in and reset the filter it down on its side. PRO-Cell filter packaging from the filter and close the life in settings or on the app.
Help & Support Thank you for welcoming Air+Health Skye into your home. We promise to make the best air purifiers in the world so that you can live your healthiest life. If you have any questions or feedback, please reach out.
Using any non-approved filters or lamps voids the warranty. coverings. Do not run cord under furniture or appliances. Arrange Replace the UV bulb with the models specified by Air+Health on cord away from traffic area and where it will not be tripped over.
Page 13
• Do not sit on, stand on, climb onto or hang from the appliance • Never touch the air purifier or its plug when your hands are wet. • If moving the air purifier, always lift and carry your Skye by the handles. Do not carry by housing or base.
Air+Health website, from the date of shipment, subject to the provisions outlined on the Air+Health website. www.airhealth.com/warranty Your serial number can be found on your Skye’s rating plate which is on the base of the appliance. www.airhealth.com/support Visit...
If these odors are produced by The levels of particles and VOCs it reports may not VOCs, the particulate matter sensor in your Skye may detect precisely conform to other methods of measuring their presence and automatically adjust the fan speed to remove them.
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful FCC Statement interference to radio communications. However, there is no guarantee that interference will not occur WARNING: Changes or modifications to this unit not in a particular installation.
Page 17
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY. PLEASE SAVE FOR REFERENCE. Air+Health Support Visit airhealth.com/support for online help, support videos, general tips, and useful information about Skye and Air+Health’s other air treatment solutions. airhealth.com contact@airhealth.com 1.866.765.1587...