Table of Contents
Advertisement
Release Table: This will empty and release a table from a track type, so it can be newly assigned.
Good to know: Use the 'Compact Tables' command in the → Setup Screen to release all unused
tables automatically. Keep in mind that tables with content (something in the transpose, hop or fx
column) will not be released. This is to avoid the deletion of prepared tables which are temporarily
not used. To release those anyway, you need to release them in the → Nerd Screen / Menu from
the table screen.
You can simple navigate between all tables by holding the
CURSOR
UP/DOWN.
Next to the sequencer row you can see the table animation which shows on which step the table is
playing right now on the available tracks. This gives also an orientation on how the sequence is
running.
Automator screen
The Automator screen contains up to 8 possible slots for Generators / Modulators / Effects /
Manipulators. An Automator can currently be an LFO, Envelope, or a CV Input. You can assign an
Automator to any of 8 Slots. The output of the Automator can be routed to several functions,
outputs and more through a modulation matrix. In the matrix there are the 8 Tracks as destinations
and in the matrix you can decide which of the setting / function / output of the track should be
modulated by the Automator. Be aware that Automators can also generate negative values (eg the
lower curve of a sinewave LFO) and for most destinations the values are scaled added depending
on the destinations maximum value.
Figure 17: Automator Screen
NerdSEQ – a tracker based Eurorack sequencer
User Manual Revision V1.26 for Firmware V1.26
TABLE
button in the table screen and
Page 73
12 July 2022
Advertisement
Table of Contents
