Table of Contents
Advertisement
Remove the current row and shift everything below the row one up:
Insert an empty row and shift everything below the current row one down:
SHIFT+DOWN+DELETE
You can browse between different patterns by holding the
keys. This will navigate between the patterns as they are arranged on the → Sequencer Screen.
PATTERN + CURSOR LEFT/RIGHT
available pattern there to be edited directly. And
through the patterns on the same track as they are lined up in the sequencer screen.
If on a FX command, you can open the FX Selector by pressing the OK button.
A menu appears with a selection of all possible 'effects' for this track type. You select an effect with
the
OK
button and it will be filled in into the FX command column.
There are several facilities to copy or delete pattern content. For that there are the 3 Buttons Mark,
Copy
and Delete.
Mark
to mark an area which should be copied or deleted (use
copy/insert a before copied area to another row/column and
area (or to delete/empty the recent cursor position). A delete will also copy the deleted values to
the clipboard, so it is possible to use it as a Cut + Paste function.
To Copy a block:
Press
SHIFT+MARK
on the first position which should be copied (Screen border colour should
change to indicate the Mark mode)
Move the cursor to the last position of the desired area ( Press
The start position of the mark can be changed when holding the
Press
SHIFT+MARK
again. Mark mode is released again, the marked block is being saved.
Now go to the Destination position with the Cursor.
there are 2 possibilities to copy.
1
st
Press
SHIFT+COPY
(Overwrites content of the Block)
nd
2
Press
SHIFT+DOWN (Not cursor down)+COPY
the current position. The involved rows will move down behind the copied/inserted area.
You can also copy in between different patterns and from/to compatible column types (eg from
notes to notes...)
NerdSEQ – a tracker based Eurorack sequencer
User Manual Revision V1.26 for Firmware V1.26
will browse through the sequencer row/tracks and select any
and the before saved block is being copied to the current position.
SHIFT+UP+DELETE
PATTERN
button and using the cursor
PATTERN + CURSOR UP/DOWN
SHIFT+DOWN
Delete
to empty or delete the marked
SHIFT+DOWN
SHIFT
and the before saved block is being inserted to
will browse
to mark all),
Copy
to mark all )
button when navigating.
Page 62
12 July 2022
to
Advertisement
Table of Contents
