Table of Contents
Advertisement
General Screen information
As mentioned before the main workflow is split into different screens.
The main screen is the Sequencer screen. From there you sequence the Patterns. You can
sequence each of the 176 patterns from each track if they are from the same type.
From the pattern you can access the different patches, tables, automations and/or samples.
Not directly dedicated to the sequencing are the Project and the Setup screen. Below a hopefully
simple view of the Sequencer → Patterns → Patch/Table/Automate/Sample relations.
Basic relations between the different Screens/Functions
Note that you can mostly freely use all patches, tables, automations or samples from the same or
different patterns. Also here, some are reduced to the type which I will describe now. Depending on
which track the pattern is created in, it is locked to the type of the track (not to the track itself). For
NerdSEQ – a tracker based Eurorack sequencer
User Manual Revision V1.26 for Firmware V1.26
Page 16
12 July 2022
Advertisement
Table of Contents
