Table of Contents
Advertisement
Within patterns (either selected with the LP or with the NerdSEQ), the LP will have different
functions.
In a Pattern Screen of a CV/Gate track you can insert or remove triggers. The matrix shows all 64
steps and by pressing a button you can insert or remove a trigger. Tapping Button
insert a trigger on the current playing position. Button
overflow). Button
E
shifts all triggers one step DOWN (with overflow). Button
triggers with the euclidean formular. Button
The current cursor position is the euclidean startpoint.
In the top row you can see which track is selected.
Pressing the most top right button will move you back to the sequencer screen. (Subject to be
changed)
The Trigger16 Pattern Screen shows the current drum-matrix for the first 8 or the 2
depending on whether the triggers are swapped or not. So columns 1..8 show drum-matrix triggers
1..8.
NerdSEQ – a tracker based Eurorack sequencer
User Manual Revision V1.26 for Firmware V1.26
Figure 29: Pattern Screen -> CV/Gate Track
G
decrements the triggers with the euclidean formular.
D
shifts all triggers one step UP (with
H (SHIFT)
will
F
increments the
nd
8 tracks,
Page 129
12 July 2022
Advertisement
Table of Contents
