XOR electronics NERDSEQ User Manual page 72

Finally the SET CHORD function can set the allowed notes directly to the chosen Chord. The
Chord note can be changed using
diminished, 7 th ) can be changed using
by pressing the OK button. The allowed notes change then to the chord settings. Holding the
button while changing the chord will result in a direct change of the allowed notes. The value of the
SET CHORD function is just a kind of preset which sets the allowed notes. Every kind of chord
value can be filled in there while the allowed notes show something different. It always needs the
OK button for the SET CHORD to be activated.
Nerd Menu / Table Presets:
For ease of use, many standard tables can be inserted as a preset. Use the → Nerd Screen /
Menu in the table screen (SHIFT+NERD) to get to the presets. Navigate down to the option Preset
> xxxxx
Choose one using SHIFT+LEFT/RIGHT and press OK, it will be inserted into the current table.
The following presets are available:
Empty: Clears the content of the table
Random: Inserts a random transpose sequence with also a hop 00 on a random step. The
random transposition range is selected by the Range (lowest and highest transposition
note)
Doubles: Inserts FX commands to create a double (ratcheting) for the main sequence. This
creates a double trigger/gate (or envelope trigger) for the main sequence in a step. As a
result, a note is then equally 2 times triggered in one step. Note that this preset also
changes the table clock and type settings so the timing and sequence is correct.
Triplets: Same as doubles, but this inserts 3 equal trigger/gates for a step so triplets can be
played.
The following are standard chords with 3 or more notes:
Triads → Major, Minor, Diminished, Diminished 5
nd
Suspended 2
7 th Chords → Dominant 7
th
Augmented 7
7 th , 7 th Diminished 5
6 th Chords → 6t
th
9 Chords → 9
11 th Chord
13 th Chord
Edit Table Name: Enter this to open the on-screen keyboard and enter a name for the table. A
table name will appear on the top right position.
NerdSEQ – a tracker based Eurorack sequencer
User Manual Revision V1.26 for Firmware V1.26
SHIFT +UP/DOWN
SHIFT
th , Minor 7 th
th
, Augmented Major 7
th , 7 th flat 9
th , Minor 6
th th th
, Minor 9 , Major 9
and the chord type (Major, Minor,
LEFT/RIGHT. The selected chord can be activated
th , Augmented, Suspended 4
, Major 7 th , Minor Major 7
th th
, 7 Augmented 9 , Half Diminished 7
th th
, 9 Diminished 5
th ,
th , Suspended 7 th ,
th
, Diminished
Page 72
12 July 2022
OK