Table of Contents
Advertisement
LISTENING TO DAB RADIO
SELECTING DAB RADIO OPERATION
To select DAB radio operation:
DAB/FM/AUX button repeatedly until 'Welcome
•
Press the
to Digital Radio' is displayed.
After a few seconds, the radio will tune to the last-used
station.
When DAB radio is used for the first time:
The system scans all usable stations (full scan) and stores
them alphanumerically -1 Radio, 2 Radio, AA Radio, AB
Radio... The initial scan will take a few minutes and a progress
bar will be displayed with the number of services found.
Number of services found
After the scan, the clock will be set, and the system will begin
playing.
Note: If no stations are found after the scan, it may be
that the signal in your current location is too weak. If this
happens, switch the system off and move it to a location
with a stronger signal. Repeat the scan process in the new
location.
The stations found will be stored in an alphanumeric list.
SELECTING A STATION
TO SELECT ANOTHER STATION
•
Press the
} or { button to browse the list of stations
on the display.
•
When you find the station name you want to listen to,
press the SELECT/MONO/ST. button.
The radio will re-tune to the station displayed.
FM RADIO
To change to the FM band:
•
Press the
DAB/FM/AUX button repeatedly until 'Radio
Initialize Please Wait' is displayed.
After a short delay, the system will tune to FM radio.
To manually tune to FM stations
•
Press
the } or { button repeatedly to tune up or down
the band one frequency step at a time.
To auto-tune to FM stations
hold the } or { button to tune to the next or
•
Press and
previous station in the band.
Tuning will stop automatically when the station is reached.
7
STATION PRESETS
DAB and FM presets
Your radio can store up to 30 of your favourite stations as
presets on both the DAB and FM bands for quick recall.
To store a preset
•
Tune to the station you want to store as a preset.
•
From the remote control, press and
hold the ID3/MEM./
C-ADJ. button until the preset store display shows with
the preset number flashing.
•
Press
the } or { button repeatedly until the preset
location you want to store is displayed.
•
Press the
ID3/MEM./C-ADJ. button to store the station in
this preset number location.
The display will confirm that the station has been stored in this
preset number.
To recall a preset
ID3/MEM./C-ADJ. button.
•
Press the
The display will switch to show presets.
•
Press
the } or { button repeatedly until the preset you
want to play is displayed.
•
Press the
ID3/MEM./C-ADJ. button to recall the station
in this preset number location.
After a short delay the radio will re-tune to the selected preset.
Hide quick links:
Advertisement
Table of Contents
