Dab & Fm Display Modes - Technika MC-121IDAB Owner's Handbook Manual

DAB & FM DISPLAY MODES
DAB DISPLAY MODES
When playing a DAB station you can change the information
on the display by changing the display mode.
To change the display mode:
Press the MENU/INFO button repeatedly to cycle through the
options listed in the chart below.
DLS (SCROLLING TEXT)
MULTIPLEX NAME
MULTIPLEX NUMBER/FREQ
AUDIO BIT RATE/ENCODING
SIGNAL STRENGTH
TIME & DATE
PROGRAMME TYPE
DLS (SCROLLING TEXT): This is a scrolling message giving real-
time information - song titles, news headlines, etc.
MULTIPLEX NAME (GROUP NAME): is the name of the DAB
Multiplex that is currently tuned.
MULTIPLEX NUMBER/FREQ: The Multiplex number and
Frequency display shows the multiplex channel number and
the multiplex frequency for the station currently tuned.
BIT RATE: DAB allows broadcasters to vary the BIT RATE (or
the amount by which an audio signal can be compressed)
depending on the type of broadcast. This enables the amount
of stations on a multiplex to be maximised. Speech and News
are often broadcast at a lower Bit Rate; music needs a higher
Bit Rate for good fidelity.
SIGNAL STRENGTH: This setting will display a signal strength
bargraph. The longer the bargraph, the stronger the signal.
Setting the display to show signal strength is useful when
setting up the aerial for the strongest signal.
TIME AND DATE: Time and date are updated by broadcasted
information.
PROGRAMME TYPE: This describes (when available) the style
of the programme being broadcast.
8
FM DISPLAY MODES
When playing an FM station you can change the information
on the display by changing the display mode.
To change the display mode:
Press the MENU/INFO button repeatedly to cycle through the
options listed in the chart below.
FM STEREO MODE
SIGNAL STRENGTH
FREQUENCY
FM STEREO MODE: In this mode the current FM stereo mode
is shown, Mono or Auto (Stereo).
SIGNAL STRENGTH: This setting will display a signal strength
bargraph. The longer the bargraph, the stronger the signal.
Setting the display to show signal strength is useful when
setting up the aerial for the strongest signal.
FREQUENCY: The Frequency display shows the frequency for
the station currently tuned.