Program Play - Technika MC-121IDAB Owner's Handbook Manual

PROGRAM PLAY

PROGRAMMING
When playing a CD or a MP3/WMA compilation, you can store
a random sequence of up to 32 tracks (CD) or 64 tracks (MP3/
WMA compilation) to play in your preferred order.
STORING A PROGRAM (CD)
To store a program:
• Load the CD that you want to play.
• Press the ID3/MEM/C-ADJ. button.
The Program Entry display will appear, prompting for the first
track number to program (P-01).
Program
position
Track
number
• Press the } or { button to select the track number for
the first track you want to program.
ID3/MEM/C-ADJ. button to store this track into
• Press the
the program memory.
The track will be stored and the program counter will increase
to P-02.
• Repeat the above two steps to store the next and
subsequent tracks in your program sequence.
Playing the program
• When you have finished entering all tracks in your
program, press the PLAY/PAUSE/SCAN button to start
the program playing.
Navigating the programmed tracks:
When the program is playing, the play and pause functions
work as normal and you can skip between tracks in the
program by pressing the } or { button. Repeat functions
may also be set.
STORING A PROGRAM (MP3/WMA)
• Load the disc/drive/card you want to play, and wait for
it to read.
• Press the ID3/MEM/C-ADJ. button.
The Program Entry display will appear, prompting first for a
folder number.
• Press the FOLDER/ARROW or
O P
the folder number containing the first track you want to
program.
Program
position
Folder
number
NOTE: If all tracks are arranged in the 'root' directory of the
disc, only 'Folder 1' (F 001) will be selectable at this stage.
14
• Press the ID3/MEM/C-ADJ. button on the remote control
to select this folder.
You can now select the track you want within this folder.
• Press the } or { button to select the track number
within this folder for the track you want to program.
• Press the ID3/MEM/C-ADJ. button on the remote control
to store this track into the program memory.
The track will be stored and the program counter will increase
to P-02.
button to select
• Repeat these steps to store the next and subsequent
tracks in your program sequence.
Playing the program
The program will play in the same way as the CD program,
described in the previous section.
CLEARING A PROGRAM
To clear a program:
• Press the STOP/MENU/INFO button to stop playback (if
necessary).
• Press the STOP/MENU/INFO button once more.
The program will be cleared from memory.
Program
position
Track
number