Advertisement
IENGLISHI
INSTALLATION INSTRUCTIONS
STEP 1: CHECK THE CONTENTS OF THE PACKAGE
Model#: DEVICEXXX-XXX
1 x Controller & enclosure, 2 x Current monitoring devices 1 x Bag
including miscellaneous pieces, 1 x Installation instructions
STEP 2: PREPARING FOR THE INSTALLATION
Disconnect power to all devices being worked on or within an unsafe distance
1.
to the working area.
Select the device installation location.
2.
The recommended place for the device to be installed is directly above
-
the main panel and with adequate air circulation. See Installation
Diagram for suggested locations.
NOTE: The DEVICE controller must be mounted so that the nameplate
-
remains visible at all times. It must not be installed in the orientation
with the cover facing the ground.
DO NOT install the device:
Outdoors
-
In a location with a high level of risk as defined by local electrical codes or in a
-
hazardous location. - for example, nearby flammable materials, explosives or
fuels, chemical products, and hazardous vapors.
STEP 3: INSTALLATION OF THE DEVICE
Ensure no dust or metal particles enter the contactor as all contactors can be
affected negatively by particles entering the active surfaces. Do not blow out
particles when completing the installation. Instead use a vacuum to clean out
enclosure.
6
Advertisement
