LOCATE AND MOUNT COMFORT INTERFACE
Wireless Devices (see
1. Locate Comfort Interface on interior wall approximately 5
temperature.
2.
Interface will cause damage to the unit.
3. Place sub-base on wall and mark mounting hole locations on
wall using base as a template.
4. Move sub-base out of the way. Drill mounting holes. Use
plastic screw anchors if needed to secure the base.
5. Fasten sub-base snugly to wall using two mounting screws.
Interface operation.
6. Comfort Interface can be attached after checking operation.
Enter wireless set-up menu - checking wireless components
installed.
8
IMPORTANT
2
Mounting Holes
Sub-base
At Comfort Interface, press the Menu button once and
1
release
Press the Connect button once and release. The Comfort
Interface will indicate
and then display
(for Equipment Control Module) when communication has
or CTL will not appear on screen.
(see Troubleshooting)
Comfort Interface