Table of Contents
Advertisement
Other tape functions and features
Tape counter
The tape counter value increments when the tape is
moving from left to right, and decrements when it moves
from right to left.
Use either of the
keys (main or remote) to reset the
RESET
value to 0000.
When the counter has been set to 0000, this position can be
reached easily by pressing either of the
remote). The tape fast forwards or fast rewinds to the 0000
mark.
Pitch control
The tape speed can be controlled using the
.
CONTROL
Turning this to the right of the center position results in
faster tape speed (higher pitch), and turning to the left
of the center position results in slower tape speed (lower
pitch). The maximum is 10% away from normal.
The center "neutral" position is marked by a click detent.
OUT2 setting (TAPE or AUTO)
Using the OUT2 menu, you can assign the
to
TAPE
or
AUTO
(the default setting is
If
TAPE
is selected, the unit outputs only the cassette tape
when playing back or monitoring.
If
is selected, the unit outputs either the cassette
AUTO
tape or disc automatically when playing back or monitor-
ing. However, note that if both are playing at same time,
the cassette takes priority (the disc will not be heard
through these outputs).
7 – Cassette operating
If the current tape position is too close to the 0000
mark (greater than 9995 or less than 0004), this func-
tion is not available.
RTZ
keys (main or
PITCH
1. Press the
LINE OUTPUTS2
TAPE
).
2. Turn the
3. Push the
1 – Introduction
NOTE
key until the menu item
MENU
shows up on the display.
MULTI DIAL
to select
to confirm and exit the menu
MULTI DIAL
operation.
OUT2>XXX
or
.
TAPE
AUTO
33
TASCAM CC-222SL
II
MK
Advertisement
Table of Contents
