Daylight-Saving Time - Sylvania RSEC720E Owner's Manual

NOTE: During Auto Clock CH Search, the picture
may be distorted, this is normal.
4
Enter the channel number that contains the
Automatic Clock Setting Signal
Press the SETUP button on the remote control.
Press the Arrow button K or L to
select "SETTING CLOCK".
Press the ENTER button to enter
"SETTING CLOCK" menu.
Press the Arrow button L to select
"AUTO CLOCK CH".
Press the ENTER button or the
Arrow button { or B until you
locate Auto Clock Set station num-
ber. See step [3] on page 16.
Press the SETUP button to exit the
screen.
5
Turn off the unit
Once the unit is turned off , it will periodically check
and set the correct date and time.
– S E T T I N G C L O C K –

DAYLIGHT-SAVING TIME

Select this feature and the unit's clock automatically
will advance one hour in April, then reverse one hour
in October.
When Daylight-Saving Time is ON, the clock will
change automatically as follows:
•
First Sunday of April :
diately changes to 3 AM. Any timer programming
you have set to occur between 2 AM and 3 AM
will not record.
•
Last Sunday of October :
immediately changes to 1 AM.
Make sure ...
•
Press the POWER button to turn on the unit.
1
Select "SETTING CLOCK"
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
point to "SETTING CLOCK".
Then press the ENTER button.
2
Set "D.S.T." (Daylight-Saving Time) to [ON]
Press the Arrow button K or L to
point to "D.S.T.".
Then press the ENTER button until
[ON] appears.
3
Exit the Daylight-Saving Time mode
Press the SETUP button on the remote control to
return to TV mode.
TO CANCEL THE DAYLIGHT-SAVING
TIME
Repeat steps [1] to [2], select [OFF] using the
ENTER button.
- 17 -
At 2 AM the clock imme-
At 2 AM the clock
- TV/VCR SETUP -
TIMER PROGRAMMING
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
B D.S.T. [ON]
EN
1C29