Okoia HP3040 Instruction Manual page 4

• Do not use the appliance when it is damp or in moist
environments. It may only be used again once it is completely
dry.
• The controls and leads must not be exposed to any kind of
moisture.
• Do not reach or retrieve the appliance that has fallen into
water. Unplug the appliance immediately.
• During operation, the switch and lead may not be placed on or
under the appliance or covered in any other way whatsoever.
• Do not place any heat sources (e.g. hot water bottles or heating
pads) on the appliance.
• Never carry, pull or turn the appliance using the power cable
and do not clamp the cable.
• Switch off the appliance and remove the plug from the mains
socket when it is not in use.
• In the event of a defect, do not repair the appliance yourself.
Repairs must only be carried out by a qualified personnel.
• Regularly inspect the supply cord, plug, controller and the
heating pillow for any damage. If damage is found, immediately
stop use of the appliance.
• If you experience any pain or discomfort while using the
appliance, stop using it immediately.
OVERVIEW
Heating pillow
Controller
Mains power cable
Mains power cable connector
Display to show
the setting 0, 1, 2 or 3
The controller has both numeric
and Braille heat markings.
The settings are:
0 OFF
1 Low heat
2 Medium heat
3 High heat
Heating pillow connector