Table of Contents
Advertisement
PARA-
SUB-PARA-
METER
METER
P7 Prt
P8 LP
P9 bUd
Baud Rate
P10 Fd
Zero-tracking
P11 bL
Backlight
P12 bP
BEEP
P13 ti
Time
Accidental or intentional changes to these parameters by unauthorised
persons can significantly affect the scale functionality!
12
DISPLAY
SETTING
Question mode, bi-directional. Command R: Read
ASK
data, Command T: Tare, Command Z: Zero.
Printer settings.
Printer language selection setting.
b 600
b 1200
Setting the required baud rate for communication
speed via the RS232 interface.
b 2400
Standard baud rate 4800.
b 4800
b 9600
Zero tracking setting.
Reserved for use by authorised technicians only.
Backlight setting.
Options: Auto / on / off.
Backlight is enabled when the weighing surface is
Auto
loaded.
on
Backlight is permanently enabled.
of
Backlight is permanently disabled.
Audible signal setting for checkweighing.
0
Audible signal is disabled.
1
Audible signal between two values is enabled.
2
Audible signal beyond two values is enabled.
Year, date and time setting.
Navigate within the digits with % and MODE,
increase the digits by 1 with TARE, confirm and
save with ZERO.
20FF
Setting the year.
1F3F
Setting the date (format: month - day).
3FFF
Setting the time (format: hours - minutes).
ZW60-210531-Rev006-UM-en
Advertisement
Table of Contents
