Yamaha NEO'S ESS025 2022 Owner's Manual page 52

Instrument and control functions
TIP
1
The odometer will lock at 99999 and
cannot be reset.
2
3 Tripmeter
The tripmeter shows the distance trav-
4
eled since it was last reset.
TIP
5
The tripmeter will reset and continue
counting after 9999.9 is reached.
6
To reset the tripmeter
7
1. Use the select button to display the
clock.
8
2. Press and hold the select button
until the tripmeter is reset.
9
Charging status display
10
When charging with the vehicle power
on, the charging status display will
11
come on automatically. It indicates the
current charge of the lithium-ion batter-
12
ies as "Lo", "Full" or a percentage in be-
tween.
13
Vehicle status messages
The following status messages appear
on the information display in certain sit-
uations:

"PUSH"
The vehicle and EV system are
ready to start.

"HOT"
The lithium-ion battery, MCU or EV
motor temperature is high. (Tem-
perature warning function to pro-
tect EV system. (See page 4-4.))

"COLD"
The lithium-ion battery tempera-
ture is low.

"OLD"
The lithium-ion battery capacity
has degraded and it needs to be
replaced.
Drive mode display
Displays the current drive mode.
When the vehicle is in the ECO mode,
the "ECO" icon will be displayed.
For more details on the drive modes,
see page 4-4.
To switch the drive modes, see page
6-8.
6-6
Incoming notification icon "
This icon flashes for 10 seconds when
the connected smartphone receives an
SMS, E-mail or other notification. After
that, the icon stays on until you turn the
vehicle off.
TIP

This function works only when the
smartphone is connected to the
vehicle.

Notification setting is needed for
each application at the connected
smartphone in advance.
Incoming call notification icon "
This icon flashes when there is an in-
EAU96541
coming call to the connected smart-
phone. If you do not answer the call, the
icon stays on until you turn the vehicle
off.
TIP
This function works only when the
smartphone is connected to the vehi-
cle.
EAU96550
"
EAU96560
"