Yamaha NEO'S ESS025 2022 Owner's Manual page 44

Smart key system (ESS025)
main switch knob (and confirmation
1
with the smart key has taken place), the
main switch can be turned while the
2
smart key system indicator light is on
(approximately 4 seconds).
3
WARNING
4
Never turn the main switch to "OFF",
" ", or "OPEN" while the vehicle is
moving. Otherwise the electrical
5
systems will be switched off, which
may result in loss of control or an
6
accident.
7
TIP
Do not push the main switch knob re-
8
peatedly or turn the main switch back
and forth excessively (beyond normal
9
use). To protect the main switch from
damage, the smart key system will tem-
10
porarily disable, and the smart key sys-
tem indicator light will flash. If this
11
occurs, wait until the indicator light
stops flashing, and then operate the
12
main switch.
The main switch positions are de-
13
scribed below.
ON
1 1 1
EWA18720
1. Push.
2. Turn.
All electrical circuits are supplied with
power.
To turn the vehicle power on
1. Turn the smart key on and bring it
within operating range.
2. Push the main switch knob and the
smart key indicator light will come
on for approximately 4 seconds.
3. While the smart key system indica-
tor light is on, turn the main switch
to "ON".
TIP
See "Emergency mode" on page 10-23
EAU96711 for information on turning the vehicle
power on without the smart key.
2 2 2
OFF
1 1 1
1. Turn.
All electrical systems are off.
To turn the vehicle power off
With the smart key turned on and within
operating range, turn the main switch to
"OFF".
TIP
When the main switch is turned to
"OFF" but the smart key cannot be con-
firmed (the smart key is either outside
operation range or has been turned
off), the beeper will sound for 3 sec-
5-8
EAU96721