Using Autopause - Suunto T6D User Manual

Setting Value
upper 00:00
To set the speed limits:
1. In the settings menu, enter
2. Scroll to
SPD LIM
3. Set the limits on or off with [Lap +] and [Light -] and accept with [Mode].
4. Change the high and low speed limits with [Lap +] and [Light -] and accept with
[Mode].
5. Press [Start Stop] to exit.

6.5 Using autopause

is a feature that will automatically stop the log recorder during your training
AUTOPAUSE
session when very slow speed is detected while using your Suunto speed and distance
POD. The session is reactivated when you speed up again.
To activate autopause:
1. In the settings menu, enter
2. Scroll to
PAUSE
3. Set autopause off, or activate it for one or all PODs with [Mode].
4. Press [Start Stop] to exit.
SPD/DST
with [Lap +] and [Light -] and enter with [Mode].
SPD/DST
with [Lap +] and [Light -].
Description
Upper speed limit
.
.
en
43