Chapter 2 Quick Start; Re-Calibrating The Screen - Sunwave Tech. SRC-7000 User Manual

Chapter 2 Quick Start

This chapter shows you how to quickly set up the SRC-7000, for a more
detailed set up please refer to Chapter 3.
At turn on, the SRC-7000 will show the welcome greeting message on
the screen. From now on, you formally enter the setup procedure.
Please operate by the following instructions step by step.

2.1 Re-calibrating the Screen

You will need to re-calibrate SRC-7000's touch panel in three conditions:
a. When you insert the batteries at the first time.
b. When you reset the SRC-7000.
c. When you feel the SRC-7000's touch panel is not so sensitive.
Please follow the instruction as below:
1. Press
2. Scroll the
3. Scroll the
press
calibration.
4. Tap the 5 "
When finished, the screen will go back to previous "Setting" menu
automatically.
When you finish tapping these 5 indicators, the re-calibration
process is completed. Then press
mode.
17
button for 2 seconds to enter Setup Menu.
or buttons to choose
button for entering "Setting" menu.
or buttons to select
button for entering "Calibrate Panel" for screen
" places following screen indication step by step.
2.
Setting item and press
Calibrate item and
3.
two times to exit setup
4.