Beko 678551EI User Manual page 56

• Do not use sharp or abrasive tools to
clean the product. Do not use materials
such as household cleaning agents, soap,
detergents, gas, gasoline, thinner, alcohol,
wax, etc.
• The dust shall be removed from the ventil-
ation grill on the rear of the product at
least once a year (without opening the
cover). Clean the product with a dry cloth.
• Take care to keep water away from the
lamp's cover and other electrical parts.
• Clean the door with a damp cloth. Re-
move all contents to remove the door and
body racks. Remove the door racks by lift-
ing them upwards. Clean and dry the
shelves, then attach back in place by slid-
ing from above.
• Do not use chlorinated water or cleaning
products on the exterior surface and
chromecoated parts of the product. Chlor-
ine will cause rust on such metallic sur-
faces.
• Do not use sharp and abrasive tools,
soap, house cleaning materials, deter-
gents, gas, gasoline, varnish and similar
substances to prevent deformation of the
plastic part and removal of prints on the
part. Use warm water and a soft cloth for
cleaning, and then dry it.
• On the products without a No-Frost fea-
ture, water droplets and icing up to a
thickness of a finger may occur on the rear
wall of the freezer compartment. Do not
clean, and never apply oils or similar ma-
terials.
• Use a mildly dampened micro-fibre cloth
to clean the external surface of the
product. Sponges and other types of
cleaning clothes may cause scratches.
• To clean all removable components during
the cleaning of the interior surface of the
product, wash these components with a
mild solution consisting of soap, water and
carbonate. Wash and dry thoroughly. Pre-
vent contact of water with illumination
components and the control panel.
CAUTION:
Do not use vinegar, rubbing alcohol
or other alcohol based cleaning
agents on any interior surface.
Stainless Steel External Surfaces
Use a non-abrasive stainless steel cleaning
agent and apply it with a soft lint-free cloth.
To polish, gently wipe the surface with a mi-
cro-fibre cloth dampened with water and use
dry polishing chamois. Always follow the
veins of the stainless steel.
Cleaning of the Products with Glass
Doors
Remove the protective foil on the glasses.
There is a coating on the surface of the
glasses. This coating minimizes formation of
stains and provides easy cleaning of the
stains and dirts that have been formed.
Glass without protective coating can quickly
and easily become permanently bonded by
organic or inorganic air and water-borne
contaminants such as limestone, mineral
salts, unburned hydrocarbons, metal oxides
and silicones that cause staining and phys-
ical damage. Despite regularly cleaning,
keeping the glass clean becomes very diffi-
cult, even if not impossible. As a result, the
clarity and appearance of the glass deterior-
ates. Harsh and abrasive cleaning methods
and compounds further exacerbate these
defects and accelerate the degradation pro-
cess.
For routine cleaning processes, *non-alkaline
and non-corrosive water based cleaning
products shall be used.
A tempering process is applied to increase
the resistance of these glasses against im-
pacts and breakage.
As an additional safety precaution, a safety
film has been applied to the rear surface of
these glasses to prevent harm to the envir-
onment in case it breaks.
Preventing Odours
The product is manufactured free of any
odorous materials. However, keeping the
food in inappropriate sections and improper
cleaning of internal surfaces may lead to
odours.
EN / 57
TR
EN