Advertisement
Programming
instructions for KF150
Key blade requires cutting
by your local locksmith.
Programming in a 3
1. Insert Old Key 'A' into the ignition and
turn to the 'I' (Acc) position.
2. Turn Old Key 'A' to the '0' (Off) position
and remove key.
3. Inset Old Key 'B' and turn to the 'II' (On)
position.
4. Turn Old Key 'B' to the '0' (Off) position
and remove. The Door locks will
sequence.
5. Inset the new key and turn to the 'II'
(On) position. If performed correctly, the
door locks will sequence 3 times to show
successful programming.
6.
Turn the new key to the '0' (Off) position
and remove from the ignition.
rd
(or more) key:
Programming in a first or second key:
1. Important Note: At least two keys have to
programmed to the vehicle.
2.
Programming needs to be done via a
compatible scan tool.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Map KF150
Summary of Contents for Map KF150
- Page 1 Programming instructions for KF150 Key blade requires cutting by your local locksmith. Programming in a 3 (or more) key: Programming in a first or second key: 1. Insert Old Key ‘A’ into the ignition and 1. Important Note: At least two keys have to turn to the ‘I’...
- Page 2 Programming Remote Control: All remote controls must be present during the below process. Any old remote controls that are not present will no longer function. 1. Ensure all doors + boot is closed. 2. Sit in driver’s seat (with door closed) 3.
Need help?
Do you have a question about the KF150 and is the answer not in the manual?
Questions and answers