Hints And Tips - Axia i-Smart 604F Instruction Manual

Table of Contents

Advertisement

Everyday soiling on
glass (fingerprints,
marks, stains left by
food or non-sugary
spillovers on the glass)
Boilovers, melts, and
hot sugary spills on
the glass
Spillovers on the
touch controls

7.Hints and Tips

Problem
The induction hob
cannot beturned on.
1. Switch the power to the cooktop
off.
2. Apply a cooktop cleaner while
the glass is still warm (but not
hot!)
3. Rinse and wipe dry with a clean
cloth or paper towel.
4. Switch the power to the cooktop
back on.
Remove these immediately with
afish slice, palette knife or razor
bladescraper suitable for Induction
glasscooktops, but beware of hot
cookingzone surfaces:
1. Switch the power to the
cooktopoff at the wall.
2. Hold the blade or utensil at a
30°angle and scrape the soiling
orspill to a cool area of the
cooktop.
3. Clean the soiling or spill up with
adish cloth or paper towel.
4. Follow steps 2 to 4 for
'Everydaysoiling on glass' above.
1. Switch the power to the
cooktopoff.
2. Soak up the spill
3. Wipe the touch control area
witha clean damp sponge or
cloth.
4. Wipe the area completely dry
with a paper towel.
5. Switch the power to the
cooktopback on.
Possible causes
No power.
• When the power to the cooktop is
switched off, there will be no 'hot
surface' indication but thecooking zone
may still be hot! Take extreme care.
• Heavy-duty scourers, some nylon
scourers and harsh/abrasive cleaning
agents may scratch theglass. Always
read the label to check if your cleaner or
scourer is suitable.
• Never leave cleaning residue on the
cooktop: the glass may become stained.
• Remove stains left by melts and
sugary food or spillovers as soon
as possible. If left to cool on the
glass, they may be difficult to
remove or even permanently
damage the glass surface.
• Cut hazard: when the safety cover
is retracted, the blade in a scraper
is razor-sharp. Use with extreme
care and always store safely and
out of reach of children.
• The cooktop may beep and turn
itself off, and the touch controls
may not function while there is
liquid on them. Make sure youwipe the
touch control area drybefore turning the
cooktop backon.
Make sure the induction hob is
connected to the power supply
and that it is switched on.
Check whether there is a power
outage in your home or area. If
you've checkedeverything and the
problempersists, call a qualified
technician.
19
What to do

Advertisement

Table of Contents
loading

Table of Contents