Using The Pause Control - Axia i-Smart 604F Instruction Manual

Set the time by touching the slider control. (e.g. 6)
Touch timer control again, the"1"will flash.
Set the time by touching the slider control (e.g.9), now the
timer you set is 96 minutes.
When the time is set, it will begin to count downimmediately.
The display will show the remainingtimeand the timer
indicator flash for 5 seconds.
When cooking timer expires, the corresponding cookingzone
will be switched off automatically.
1) Other cooking zone will keep operating if they are turned on previously.
2）The red dot next to power level indicator will illuminate indicating that zone is selected
The steps for setting more zones are similar to the steps of setting one zone;
When you set the time for several cooking zonessimultaneously, decimal dots of the relevant cooking
zones are on.The minute display shows the min. timer. The dot of the corresponding zone flashes.
The shown as below:
(set to 15 minutes)
(set to 45 minutes)
Once the countdown timer expires, thecorresponding
zonewill switch off. Then it will showthe new min. timer
andthe dot of corresponding zone will flash.
The shown as right:
Touch the heating zone selection control, the corresponding timer will be shown in the timer indicator.

3.4.8Using the Pause control

1. When the cooking zones are running, touch the ""
control,all the displays will show " " and stop heating.
At this moment only "" and """Lock" control
can be operated.
2. Touch "" again, the displays showthe original setting, and the cooking zones keep on heating.
set more zones:
(set to 30 minutes)
16