Related Manuals for YAUFEY HD163A
Summary of Contents for YAUFEY HD163A
- Page 1 Home Dehumidifier Please read the manual carefully before using the product HD163A USER MANUAL www.yaufey.com...
- Page 3 REQUESTING CUSTOMER SERVICE If there are any problems of the product, please contact Yaufey Customer Service support@yaufey.com with your Purchase Order ID. We’ll help you solve the...
- Page 4 BEFORE FIRST USE: To protect the product from any internal damages, please keep the product in the upright position throughout its journey. Please take out the product and leave it standing in the upright position for 24 HOURS before plugging it in.
-
Page 5: Table Of Contents
Important Safety Instructions..........1 Parts Description ..............3 Operations ................4 Care & Cleaning..............10 Troubleshooting..............11 Specifications ..............14 Warranty & Contact Us............15... -
Page 6: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT NOTICE FOR FIRST USE To prevent any injuries to the user or other people, please follow the instruction below when using the dehumidifier. Any incorrect operations may cause harms or damages. This dehumidifier is for indoor use only. ●... - Page 7 Yaufey Customer Service at support@yaufey.com for repair or replacement. 2. Do not operate dehumidifier with a damaged cord or plug. Please contact Yaufey Customer Service at support@yaufey.com for repair or replacement. 3. To reduce the risk of fire or electric shock, do not use this dehumidifier with any solid- state speed control device.
-
Page 8: Parts Description
PARTS DESCRIPTION FRONT BACK Air Intake Grille... -
Page 9: Operations
OPERATIONS PLACE CORRECTLY This unit may have been tilted or placed upside down during shipping. To make sure the dehumidifier works properly, please place it in the upright position for at 24 hours before first use. This dehumidifier is designed to operate in a working environment between 4 °C and 95°F (35°C). - Page 10 OPERATIONS Power Button Press this button to turn the dehumidifier on and off. Setting Button The humidity level can be set within a range of 30%RH to 80%RH in 5% increments. When the dehumidifier starts to work, it will first automatically detect and show the humidity (and temperature) in the room, then you can press and hold the Soetting Buttons to change the humidity to 5% increments.
- Page 11 OPERATIONS Speed Button Control the fan speed. Press this button to select either High or Normal fan speed. A higher fan speed will result in quicker moisture removal. Set the fan control to high for maximum moisture removal. When the humidity has been reduced and quiet operation is preferred, set the fan control to normal.
- Page 12 Repair or replace the humidity sensor. If the malfunctions still exist, please don't hesitate to contact Yuafey Customer Service at support@yaufey.com for help. Notice: Before turning on the machine, please be sure to have opened the air outlet. Otherwise, the machine will overheat. Do not unplug the power...
- Page 13 OPERATIONS REMOVING THE COLLECTED WATER 1. Use the bucket 1. Take out the wanter bucket. 2. Empty the water bucket. 3. Put the water bucket back to its proper position. NOTE: Put the empty bucket back into the unit and once seated correctly, the unit will start up again.
- Page 14 OPERATIONS 2. Continuous draining Continuous Drain NOTE: Make sure the connection is tight and there is no leakage. Lead the water hose to the floor drain or a suitable drainage facility. The drainage facility should be lower than the drain outlet of the dehumidifier. Be sure to run the water hose slowly downward to let the water flow out smoothly.
-
Page 15: Care & Cleaning
CARE AND CLEANING CARE AND CLEANING OF THE DEHUMIDIFIER WARNING Turn off the dehumidifier and unplug it from the wall outlet before cleaning. 1. Clean the bucket 2. Clean the air filter 3. Storing the dehumidifier When not using the dehumidifier for long periods of time. ●... -
Page 16: Troubleshooting
TROUBLESHOOTING Before requesting Yaufey customer service, please check the following list for troubleshooting first. These abnormal conditions are not the result of defective workmanship or materials in this dehumidifier. Troubleshooting Problems Possible Causes Is the full tank indicator flashing? (The tank is full or it is in a wrong position.) - Page 17 TROUBLESHOOTING The room temperature is too low or the ambient temperature is below 41℉(5℃) (The machine will not work or it dehumidifies very slowly in low temperature). Clean up the dirt on the air inlet and outlet. Please check to see if the filter package is removed and it is installed properly.
- Page 18 Move the float and make sure The float of the water tank has it can swing freely. sunk. Please contact Yaufey Customer Service at support@yaufey.com dehumidifier operates abnormally or does not operate, and the solutions above are not useful. -13-...
-
Page 19: Specifications
SPECIFICATIONS MODEL HD163A POWER SOURCE 120V～60Hz RATED POWER(95°F,90%RH) 200W RATED CURRENT(95°F,90%RH) 2.0A 8.5 Pints/Day(4.0L/Day) MOISTURE REMOVAL(65°F,60%RH) 13 Pints/Day(6.15L/Day) MOISTURE REMOVAL(80 ℉,60%RH) 25 Pints/Day(11.8L/Day) MOISTURE REMOVAL(86 ℉,80%RH) 31 Pints/Day(14.7L/Day) MOISTURE REMOVAL(95 ℉,90%RH) INPUT POWER(65°F,60%RH) 120W INPUT CURRENT( 65°F ,60%RH) 1.1A IEF( 65℉,60%RH) 1.30 liters/kWh... -
Page 20: Warranty & Contact Us
CONTACT US Warranty Yaufey offers a 12-month warranty to all of our products together with the original proof of purchase when a defect occured, including those newly purchased and unused, from Yaufey or through an authorized reseller, wholly or substantially, or as a result of faulty manufacturing parts, or workmanship during the Warranty Period. - Page 22 Yaufey Yaufey Yaufey www.yaufey.com Yaufey We are expecting to see our products fulfill your life and hear your voice. Your satisfaction means a lot to us. Please tag us if you share a snap on your social media. www.yaufey.com...
Need help?
Do you have a question about the HD163A and is the answer not in the manual?
Questions and answers