Charging The Battery; Using The Charger - infaco MAL1B15 User Manual

charging the battery

Using the charger

To charge your battery, plug in the charger in a well ventilated area which is free from infl ammable
products and other sources of combustible materials. The area must be at a temperature between
10°C and 25°C and be sheltered from damp conditions. 10°C and 25°C and be sheltered from damp conditions.
1. Connect one end of the power cord 1. Connect one end of the power cord
3. When powered on, the charger initialises:
Green LED + Red LED light
Charging the battery
It is strictly forbidden to charge the batteries when the temperature in the room is below 0°C
or higher than 40°C.
When charging, the battery must not be covered and not be close to a heat source.
1. Place the battery on channel 1
3. . Battery charge completion:
- Channel 1: Green LED on (not fl ashing).
The time needed to fully charge an 831B battery
is about one and a half hours.
8
NOTMAL1B15_ENUSA_01.indd 8 NOTMAL1B15_ENUSA_01.indd 8
to the charger.
for 2 seconds.
of the charger.
2. Connect the other end of the power cord 2. Connect the other end of the power cord
to the mains outlet.
4. When the LEDs turn off,
the charger is ready for use.
Voie 1
2. Once the battery is in place, the charger detects it
and begins charging:
- Channel 1: Green LED fl ashes quickly
throughout the charge.
15/07/2020 10:40:39 15/07/2020 10:40:39