Page 1
L850B Li-ion battery Original user guide - User instructions The specific translations of these user manuals Are available on www.infaco.com/downloads/user-manuals/...
contents Compatible tools Precautions before use Personal protection equipment Protection of the environment General product view Specifications User guide Commissioning User interface Precautions for use and safety Battery charging Storage conditions Safety instruction Warranty conditions Advice Form to be returned on purchase of the tool Technical information CE declaration of conformity...
> Power tools must not be disposed of with household refuse. > The device, accessories and packaging must be taken to a recycling center. > Ask the approved INFACO dealer for up-to-date information on the eco- compatible elimination of waste.
general product view Vest Battery Case Mains power cord Manual 2A charger Adjustable straps Battery attachments Stomach straps Serial number Connector Interface Clips 140°F -4°F...
Reference L850B Rated voltage 46.8V Capacity 17.5Ah Energy 820Wh Battery pack only weight 4.1 Kg Battery pack + vest weight 4.8 Kg Charging time 10h at 2A Charger power L852C1 > 240VAC/50-60Hz voltage L852C2 > 100/240VAC/50-60Hz Max charging voltage 54.6VDC...
User guide Pass the straps Pull the straps and pass them under the battery clip. through the vest openings. Fold the battery onto the vest and clip the battery. Then tighten the straps and fold them onto the hook and loop.
After 4 hours without battery use (no charging or discharging), the battery automatically switches to standby mode, the interface turns off. Read the INFACO manual for the tool being used before connecting the other end of the accessory cable.
user interface Bar graph Status indicator Activation button BAR GRAPH STATUS INDICATOR Battery level Battery > 60% in service flashing Battery level Battery < 60% charging Battery level Battery < 30% in standby mode flashing Battery Battery level in thermal Empty safety mode Battery...
Page 11
* If the battery suffers a fault, the accessory cable must be disconnected from the battery socket to reinitialize. If the fault is still visible after further use, it is imperative to stop using the battery and contact an approved INFACO dealer.
L850B battery is exclusively reserved for powering tools manufactured and marketed by INFACO. The L850B battery is used to power the Powercoup range, the Electrocoup F3005, F3010, F3015 shears and the shear poles, Electroliv 48V, Electroflor, the A48v3 sharpening tool. Before using one of those tools, carefully read its user manual and follow the use and safety instructions.
The battery must only be charged using the Li-ion IP41 charger supplied by INFACO, which must connected as indicated below 104°F 32°F The charger must be stored and only used indoors in a dry location protected from the elements.
Page 14
Orange indicator: battery charging Capacity less than 90% Yellow indicator: battery charging Capacity greater than 90% Green indicator: battery charged Capacity at 100% When the battery is charged, disconnect the charger plug from the battery. It is advisable to disconnect the charger mains plug to avoid any damage due to possible overloading on your grid.
Charge the battery before inter-seasonal storage. Do not store the battery for more than 1 year without recharging it. Do not store batteries that are out of order, return them to your approved INFACO dealer or directly to INFACO. Do not store the battery with a connected cable.
Do not attempt to power a tool other than those indicated in the use rules Do not use the charger for batteries other than the Li-ion batteries marketed by INFACO. Do not use another charger than the Li-ion charger supplied by INFACO to charge the Li-ion battery.
Page 17
If your charger’s or battery’s power cord is damaged, it is mandatory to have it replaced by an original cord or unit from the INFACO factory or an approved INFACO dealer. Do not leave the battery or charger in reach of children or visitors. Children should be supervised to make sure they do not play with the tool.
The warranty cannot entitle to compensation for: The possible immobilization of the tool during repairs. All work carried out by a person other than approved INFACO agents will cancel the tool warranty. The repair or replacement during the warranty period does not extend or renew the initial warranty.
Advice Keep your work zone tidy. Clutter in work zones increases accident risks. Take into account the work zone. Do not expose power tools to rain. Do not use power tools in damp or wet environments. Make sure the work area is properly lit. Do not use power tools if there are flammable liquids or gases nearby.
To be returned to infaco To validate the warranty, REGISTER IMMEDIATELY ONLINE ON : www.infaco.com, your warranty declaration or send this form filled out IN BLOCK CAPITALS AS SOON AS THE TOOL IS PURCHASED. Name > ..........First name > ............
Page 21
Serial number dealer To be kept by the dealer for the INFACO customer file INFACO S.A.S. Bois de Roziès 81140 CAHUZAC-SUR VERE France...
Technical information or customer service INFACO S.A.S. Bois de Roziès 81140 CAHUZAC-SUR VERE France Phone: (+33) 05 63 33 91 49 - Fax: (+33) 05 63 33 95 57 Email: electrocoup@infaco.fr Technical videos available on the website: www.infaco.com...
“electric chargers” (directive 2004/108/CEE) and with national legislation adapting them. The person authorized to compile the technical file at INFACO is Mr. ALVAREZ Grégory. The person authorized to compile the technical file within the company INFACO is Mr. Gregory ALVAREZ. At / >...
Page 24
User manual. Li-ion battery L850B NOTL850B_US_04...