Table of Contents
Advertisement
5.2
Instructions for the hardware settings
5.2.1 BD – baudrate
The command BD enables the change of the baud rate. The settings are directly effective.
Input format:
Output (example):
Parameter:
PARAMETER
0
1
2
3
4
5
5.2.2 RE – read EEPROM
You can read out the internal EEPROM with the RE command.
Input format:
Output (example):
Parameter:
PARAMETER
0000h..079Fh
5.2.3 RF – radio frequency
With the command RF you can switch the antenna field on and off.
Input format:
--------------------------------------------------------------------------------19/50--------------------------------------------------------------------------------
BD <SP> parameter <CR>
2 <CR>
FUNCTION
4800 baud
9600 baud
19200 baud
38400 baud
57600 baud
115200 baud
RE <SP> parameter <CR>
FF <CR>
FUNCTION
address
RF <SP> parameter <CR>
Advertisement
Table of Contents
