Advertisement
Release all keys once it reaches your aim value;
Step4
Repeat operation from Step 2 / 3 / 4 to adjust
other parameters;
After configuring all values, press the
Step5
save data and back to normal monitor status.
Attention: the modified value will be saved
automatically and back to normal status if
without operation in 30 seconds.
4. Run the Forced Refrigeration
Hold the
https://www.thermo-hygro.com
do it again to stop defrosting.
More Tips:
This unit controls the defrosting only by the time, but not by
the evaporator temperature like
key to change the value;
key for 3s to start the forced-defrosting mode;
STC-9100.
3 / 4
key to
Advertisement
