Haswill STC-8080H Quick Start Manual page 2

2. Function Menu
Code Function
Temperature for Refrigeration Starts
F1
Temperature for Refrigeration Stops
F2
Temperature Calibration
F3
Compressor Delay Time
F4
Over-temperature to Trigger Alarm (more than
F5
F1)
Alarm Delay Time
F6
Defrosting Cycle / Interval Time
F7
Defrosting Lasting Time
F8
https://www.thermo-hygro.com
3. Configuration
The aimed temperature range was defined from "F1" to
f2"; you need to set both.

≥ F1, refrigeration starts.

≤ F2, refrigeration ends.
Hold the
Step1
appear.
Press the
Step2
function you want to update;
Press the
Step3
Hold the
key for 3s, and the code F1 will
or keys to get the aim
key to check the existing value;
key meanwhile press the
2 / 4
or