Table of Contents
Advertisement
3. If the language you want is not selected, press the Item d button until the printout indicates the
language you want.
Note:
You cannot change the language by the Item u button.
4. Press the Set (o) button to select the desired language.
The printer prints a message asking if you wish to print all of the current settings.
Note:
The language you select is also effective when you are entering the lock-out setting mode or
bidirectional adjustment mode.
5. Select an item by pressing the Item d or u button.
The printer prints the item and the current setting value of that item. The item list will be
advanced one by one as the button is pressed, and the current setting value will be printed
according to the item.
6. Select setting value by o button. That value can be changed by pressing the o button and the
value is printed.
Repeat steps 5 to 6: The other items can be changed in the same way.
7. When you finish making settings, press and hold the Menu (o and d) buttons until the Font
lights stop flashing. The printer exits the default setting mode. Any settings you have made
remain in effect until you change them again.
Note:
If you turn off the printer without exiting the default setting mode, any changes you have made
will be lost.
Lock-Out Mode
You can restrict the use of buttons on the control panel by using the lock-out mode.
LQ-780/LQ-780N
User's Guide
Printer Basics
26
Advertisement
Table of Contents
