4 . After selecting the disc you wish to use, place
the appropriate shaft on the center coupling in
the bottom of the processing basin (instructions
for individual discs follow in this manual) then
attach the appropriate disc .
5 . Place the lid with feed chute on top of the
processing basin, aligning the tabs and locking
it into place by turning counterclockwise . The lid
is locked when it clicks firmly into place . The lid
will always, and only, lock when the feed chute is
aligned opposite the continuous flow chute . (B)
Note: Be sure to lock the processing basin in place before attaching the
shafts, discs, or lid .
6 .
Insert the food pusher into the feed chute of
the lid . (C)
7 .
Plug in the appliance . If the appliance is properly
assembled, the appliance will turn on when the
power dial is turned clockwise . If it does not turn
on, the interlocks are not properly engaged .
Important: For your protection this appliance has
an interlock system . The appliance will not operate
unless the processing basin and lid are properly
locked in place .
U SIN G TH E F E ED C HUTE AN D PU S HE R
Note: Before operating the appliance, be sure the processing basin,
discs and lid are properly assembled on the appliance base .
1 . Place food to be processed in the feed chute . Use the food pusher to
guide food through the feed chute .
U SIN G TH E P OWER DI A L
Note: If the appliance does not operate, make sure the processing basin
and lid are properly locked on the base . There is an automatic safety
lock that causes the appliance to stop working if the processing basin
and/or lid are not properly locked in place .
The one-speed power dial is located on the front of the
appliance base .
1 . Make sure the power dial is in the O (OFF) position .
2 . Plug in the appliance to turn it on .
3 . Turn the power dial clockwise to I (ON) position . (D)
4 . To stop, turn the power dial counterclockwise to
O (OFF) position .
5 . Always unplug the appliance when not in use .
6
B
C
D