Advertisement
Quick Links
QUICK
START GUIDE
eufy Video Doorbell Dual (Wired)
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are
trademarks of Anker Innovations Limited, registered in the United States and other
countries. All other trademarks are the property of their respective owners.
51005002970 V01
Advertisement
Related Manuals for eufy Security T8203
Summary of Contents for eufy Security T8203
- Page 1 START GUIDE eufy Video Doorbell Dual (Wired) Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
-
Page 2: Product Overview
Video Doorbell Screw Hole Mounting Bracket 15° Mounting Wedge Dual (Wired) Positioning-Card (Attached to 15° (Optional) Model: T8203 Mounting Wedge) Extension Wires and Wire Jumper for Existing Screw Packs (Spare screws Doorbell Detaching Nuts (Optional) Chime (The second one is and anchors are included.) -
Page 3: App Installation
VIDEO DOORBELL APP INSTALLATION INSTALLATION Note: Make sure you have installed the eufy Security App and scan the QR code before 1. Download and install the eufy Security app, then sign up for an account. handling the doorbell installation. Step 1 Ring the existing doorbell, make sure it’s working and locate the place of your existing... - Page 4 Step 4 Step 3 Find the doorbell chime in your house, then remove the cover and find the screw terminals Remove the existing doorbell button at the front door. Pull the two wires out carefully with TRANS and FRONT markings. Use the provided jumper for existing chime to connect when removing the old doorbell.
- Page 5 Step 5 Optional: Use the 15° mounting wedge as a supplementary mounting bracket if you wish to see more on a specific side. Determine the mounting position of the doorbell. Consider the below factors: 1. Check if you can reuse the existing holes and anchors on the wall or door frame. 2.
- Page 6 What are required: Mounting Bracket / Screw Packs / 15° Mounting Wedge(Optional) / if the wall doesn't have space for wire nuts. Phillips-Head Screwdriver What are required: Extension Wires and Wire Nuts (Optional) / Video doorbell / Philips- Head Screwdriver eufy Video Doorbell Dual (Wired) Model: T8203...
- Page 7 Step 9 Use the doorbell detaching pin provided if you wish to detach the doorbell from the mounting bracket. The detaching pin has magnet pad on the black-color side. Stick it on iron surface where There are 2 thermal conductive pads on the mounting bracket. They're used to conduct you can find it easily.
- Page 8 Step 12 Switch the doorbell or master circuit breaker to ON. Follow the on-screen instructions in eufy Security App. Install the doorbell power connector to the doorbell chime and then pair it to your video doorbell. Note: One video doorbell can link up to 4 electronic chimes. Use the volume and music buttons on the side of the electronic chime to adjust the volume and ringtone.
- Page 9 NOTICE (United States Of America) NOTICE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired NOTICE (Canada) operation.
Need help?
Do you have a question about the T8203 and is the answer not in the manual?
Questions and answers
Reboot device thru app doesn’t work, how can I reboot physically