Raspberry pi
Grove Base Hat for RasPi
Get ONE Now
Get ONE Now
Step 2. Plug the Grove Base Hat into Raspberry Pi.
Step 3. Connect the Grove - Loudness Sensor to to the A0 port of the Base Hat.
Step 4. Connect the Raspberry Pi to PC through USB cable.
Software
Step 1. Follow
Setting Software
to configure the development environment.
Step 2. Download the source file by cloning the grove.py library.
cd ~
git clone https://github.com/Seeed-Studio/grove.py
Step 3. Excute below command to run the code.
cd grove.py/grove
python grove_loudness_sensor.py 0
Following is the grove_water_sensor.py code.
Grove - Loudness Sensor
Get ONE Now
Need help?
Do you have a question about the Grove Loudness Sensor and is the answer not in the manual?